0F Internal Fault (Stack)

MINI does not provide diagnostic information based on MINI-FC codes. All diagnostic information is based on P-codes. For MINI-FC code descriptions and corresponding P-code translations please refer to Diagnostic Trouble Code Descriptions, find the P-code that corresponds with the MINI-FC code, and use the appropriate information based upon the P-code. See: Diagnostic Trouble Code Descriptions/P Codes 0F Internal Fault (Stack) 0F Internal fault (stack) Possible cause(s) of fault: Memory cell defective Storage condition(s): The memory content of the CPU data is checked for plausibility. If an implausibility is indicated, a fault entry is made. Troubleshooting procedure: Clear fault memory, switch ignition off/on and check whether the fault is entered again Yes: replace steering angle sensor No: ignore fault, as it is likely that EMC scatter was the cause Note: After replacing the steering angle sensor, it must first be coded and then calibrated using the ABS/DSC diagnostic program